Logg inn for å se priser
The Orlaco FAMOS camera is an extremely robust, compact industrial camera that can be used in virtually all video solutions on machines, vehicles and vessels. The camera’s advanced CMOS sensor is shock and vibration-proof, 100% waterproof, has a heated glass lens and provides the best possible image in all weather conditions. In addition, it has an integrated ‘safety ticker’ for ‘frozen’ images, so you definitely know that the camera is active.
The new FAMOS cameras feature a number of improvements. The redesign has reduced the number of parts, which has further increased the reliability of the camera. This has enabled the camera to achieve the highest EMC standards. With its advanced CMOS sensor, the camera has a light sensitivity of 0.05 Lux. The new lens in this camera has heated glass as standard, with a special hard coating to prevent scratches.
Certification
Approvals
Approvals in accordance with all relevant EMC and automotive directives. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause unwanted use. Certificates available on request.
Green passport
All materials comply with Green Passport requirements according to IMO resolution MEPC.197 (62) as adopted on July 15, 2011
(Maritime sector: The International Maritime Organization on the functions of the Marine Environment Protection Committee).
| Weight | 0.21kg, 0.29 in standard packing. |
|---|---|
| Housing | Cycoloy (PC + ABS). Filling: Camera is potted with Polyurethane elastomer. |
| Shock constancy | Random vibration test 15,3Grms at frequency: 24 to 2000, PSD (g²/Hz) 0,04 to 0,10. |
| Video Signal | PAL = 720(H)x576(V) 50fld/s.Vtt composite video into 75 Ohm. |
| Kamera | camera |
| Ingress protection | IP67 according to IEC 60529, IP69k according to DIN 40050-9 |
| Power consumption | Heating off: 1.1W at 12V, 1.2W at 24V; Heating on: M.P. at 24V 0.15A = 3.6W. M.P. at 12V 0.28A = 3.4W |
| Fast Linse kamera hoved | Fixed Lens camera head |
| Transient protection | camera has an integrated circuit that protects the camera against over- and undervoltage, |
| Connectors | 0,5m cable with 4p molded male connector (camera power input and video output). |
| Kunde segment | Construction machinery, Crane, Lifting equipment, Marine offshore, maritime, Vehicles |
| Fast linse kamera | analog |
| Min. cable bend radius | 50mm |
| Operating temperature | -40°C to +85°C. |
| Storage temperature | -40°C to +100°C. |
| Dynamic Range | 12…24V/DC. |
| Sensor element | ¼" CMOS digital image sensor. 640 H x 480 V. |
| Mounting hardware | Standard stainless steel. |
Copyright © 2024 Vision Technology Grid AS - All rights reserved
